ORGANIC CHEMISTRY
"Alchemical" Diffusion
“Twin-torus” spheres made out of sterling silver, which are closed together on one side, but able to be separated.
‘Electrode’ rings are placed ‘outside’ on each torus sphere, facing inwards towards the centre. 3/11 or 1:3785999999 of the size of the sphere.
The inbound electrode ring is made of fermium-ytterbium, and the outbound electrode ring is made of titanium alloy.
When separated, the ‘oculus’ hole of each sphere is used to fill and empty them.
Sphere is sealed using a sterling silver ‘cap’. The cap for each side should be engraved with a “ying-yang” symbol, which lock in perfectly with the symbol on the opposing cap.
The inside of each cap should also be engraved with a “ying-yang” symbol, exactly opposite of the symbol on the other side of the cap which is used to lock into the other sphere.
Fill the spheres with water and pass through 100 volts through them continually, until all water has been completely reduced, and all subsequent reactions within the spheres are complete.
The easiest way to do this is to fit a ‘kill switch’ to the electrical circuit passing 100v through the spheres.
Once the water has been exhausted, and all reactions are complete, electrical dissipation within the diotic pressure sync will centralise and amass till it repels inbound current.
Design the electrical circuit to “switch off” when 1/100 of the voltage is detected ‘pushing back’ so it switches off automatically when it is done.
From repeating various combinations of the polarized reduction product, you should be able to produce all “elements”, chemicals or compounds
“Twin-torus” spheres made out of sterling silver, which are closed together on one side, but able to be separated.
‘Electrode’ rings are placed ‘outside’ on each torus sphere, facing inwards towards the centre. 3/11 or 1:3785999999 of the size of the sphere.
The inbound electrode ring is made of fermium-ytterbium, and the outbound electrode ring is made of titanium alloy.
When separated, the ‘oculus’ hole of each sphere is used to fill and empty them.
Sphere is sealed using a sterling silver ‘cap’. The cap for each side should be engraved with a “ying-yang” symbol, which lock in perfectly with the symbol on the opposing cap.
The inside of each cap should also be engraved with a “ying-yang” symbol, exactly opposite of the symbol on the other side of the cap which is used to lock into the other sphere.
Fill the spheres with water and pass through 100 volts through them continually, until all water has been completely reduced, and all subsequent reactions within the spheres are complete.
The easiest way to do this is to fit a ‘kill switch’ to the electrical circuit passing 100v through the spheres.
Once the water has been exhausted, and all reactions are complete, electrical dissipation within the diotic pressure sync will centralise and amass till it repels inbound current.
Design the electrical circuit to “switch off” when 1/100 of the voltage is detected ‘pushing back’ so it switches off automatically when it is done.
From repeating various combinations of the polarized reduction product, you should be able to produce all “elements”, chemicals or compounds
No comments:
Post a Comment